MilesightSensors and gatewaysMaker of LoRaWAN sensors for temperature, air quality, leaks, level and soil, as well as indoor and outdoor gateways. We use them mainly in buildings, cold storage and agricultural applications.
Internet of Things
Measure what matters, from anywhere
We place wireless sensors where you need measurements and connect them to a dashboard with alerts. You see temperature, humidity, level, voltage or vibration in real time and learn about a problem before it causes damage.
Free first meetingAcross Greece
Smart CoolingChiller room, restaurant kitchen
Within limits–
- Cold room temperature
- Min, 60′
- –
- Max, 60′
- –
- Battery
- –
- Signal (RSSI)
- –
Sample data · one reading per minuteLast reading: now
Overview
How an IoT system works in practice
Each sensor measures one or more values and sends the reading over LoRaWAN, a low-power, long-range wireless protocol. Most sensors run on batteries, so they need no power or network cables. Battery life depends mainly on how often they send data.
A gateway receives signals from sensors at distances from hundreds of metres inside buildings to several kilometres in open terrain. From there the data passes to a network server and ends up in a dashboard, where you set limits, view history and get alerts. We handle the study, installation, configuration and maintenance.
IoT solutions
What you can monitor
Smart Cooling
Wireless sensors measure the temperature in every fridge, cold room and freezer around the clock. If anything goes out…
Smart Buildings
Wireless sensors measure CO₂, temperature, room occupancy, energy use and water leaks with no new wiring. The data…
Smart Marine
Sensors on board measure battery voltage, bilge water, position and shore power. If anything changes while the boat is…Smart Cities
Sensors in bins, parking spaces, water meters and lighting poles send readings to one shared dashboard. Crews go where…
Smart Agriculture
Sensors in the soil and a weather station show you how much water the roots have and what the weather is doing on your…
Smart Forests
Sensors in the forest and along its edges measure air humidity, temperature, wind and combustion gases. When conditions…
Industrial IoT
Wireless sensors measure vibration, temperature and current on your motors, pumps and fans. You see when a machine…Architecture
How an IoT solution works
Sensor
Measures temperature, humidity, CO₂, level, voltage, vibration or whatever else you need. It usually runs on a battery and sends a reading at regular intervals or when something happens.
Measures temperature, humidity, CO₂, level, voltage, vibration or whatever else you need. It usually runs on a battery and sends a reading at regular intervals or when something happens.
LoRaWAN gateway
Receives the signals from all sensors in the area and forwards them to the internet over Ethernet, 4G or Starlink. One gateway usually covers a whole building or farm.
Receives the signals from all sensors in the area and forwards them to the internet over Ethernet, 4G or Starlink. One gateway usually covers a whole building or farm.
Network server
Manages the devices, decrypts the messages and delivers them to the platform. We use the Helium network or Actility's ThingPark, depending on coverage and project requirements.
Manages the devices, decrypts the messages and delivers them to the platform. We use the Helium network or Actility's ThingPark, depending on coverage and project requirements.
Dashboard
Readings appear as charts, maps and tables in Datacake, Tago.IO or platform.csdynamics.gr. There you set limits, view history and export reports.
Readings appear as charts, maps and tables in Datacake, Tago.IO or platform.csdynamics.gr. There you set limits, view history and export reports.
Alerts
When a value exceeds its limit or a sensor stops sending, the person in charge is told by email, SMS or push notification. You decide who is told, about what and at what times.
When a value exceeds its limit or a sensor stops sending, the person in charge is told by email, SMS or push notification. You decide who is told, about what and at what times.
Partners
Equipment and platforms
MilesightSensors and gateways
DraginoSensors and gatewaysMaker of low-cost LoRaWAN nodes, such as temperature sensors with external probes, distance sensors and RS485 converters. They are useful when you need to adapt to existing instruments.
adeunisIndustrial sensorsFrench maker of LoRaWAN sensors for industry and buildings, with pulse counters, analogue inputs, dry contacts and temperature. It also offers coverage testers for field surveys.
SeeedField sensorsSeeed Studio makes the SenseCAP range of industrial LoRaWAN sensors and multi-parameter weather stations. They suit outdoor sites, agriculture and forests.
WattecoBuilding and energy sensorsFrench maker of LoRaWAN sensors for indoor air quality, temperature, energy and water meters, and Modbus integration. It suits buildings and facilities that want to measure consumption.
HeliumLoRaWAN networkA decentralised public LoRaWAN network, with hotspots run by individuals and businesses. Where there is coverage, sensors connect without your own gateway and you pay per message.
ActilityNetwork serverActility's ThingPark platform is a professional-grade LoRaWAN network server used by telecom operators and businesses. We use it on private networks with your own gateways.
DatacakeDashboard platformA no-code IoT platform for dashboards, reading history, alert rules and reports. It supports many LoRaWAN sensors out of the box, so new devices connect quickly.
Tago.IODashboard platformA cloud platform for device management, dashboards, data analysis scripts and alerts. It suits projects that need custom logic or access for many users with different permissions.
FAQ
Frequently asked questions
Can't find what you're looking for? Call us or send us a message.
What is LoRaWAN and why do you use it?
LoRaWAN is a wireless protocol designed for sensors that send small data packets over long distances with very low power use. Unlike Wi-Fi, one gateway covers a large area and the sensors run on batteries. It suits measurements, not video or large volumes of data.
How long does a sensor battery last?
It depends mainly on how often the sensor sends a reading, the ambient temperature and the signal quality. With a reading every 10 to 15 minutes, most sensors usually last a few years. The dashboard shows each device's battery level, so you can replace it in time.
Do I need my own gateway?
Not always. If your area is already covered by the Helium network, the sensors can connect to it. For enclosed spaces, basements, cold rooms or remote sites, we recommend your own gateway, so coverage does not depend on third parties.
Can I see the data on my phone?
Yes. Dashboards open in a browser on your phone, tablet or computer, and alerts arrive by email, SMS or push notification. You can give partners access with different permissions, for example view only.
What happens if the power or internet goes down?
Battery sensors keep measuring. If the gateway loses its connection, it can switch to backup 4G or run on a UPS, depending on how critical the application is. We also set up an alert for when a gateway or sensor stops communicating.
Is there something you want to measure?
Tell us what you want to monitor and where, and we will suggest sensors, coverage and a dashboard.